![]() |
Digitalfire Ceramic Materials Database | Logged in as Level 2 access: Logout |
Oxides | Minerals | Materials | Recipes | Articles | Glossary | Hazards | Library | MDT | Pictures | Properties | Schedules | Temperatures | Tests | Troubles | Typecodes
Newman Red ClayHigh temperature red burning low plastic stoneware
In 2003 this material became unavaiable. There were problems with consistency and lack of compatibility with light colored materials also produced at Gladding, McBean & Co. However as of Mar 2004 it was again available. The reintroduction was accompanied by a new data sheet on which the numbers only add up to 92.8? In addition the material is much more expensive and is more coarsely ground (some 30 mesh grit) so some companies began using substitutes. In March 2006 is was again unavailable. Newman is a red burning, low plasticity, low dry strength fireclay useful in both plastic and casting bodies to impart red color. It has powerful staining abilities (beyond what its percentage of iron suggests). For example, even if diluted to 50% in a recipe the body can still fire bright red in oxidation. Newman clay has a very fine particle size coupled with some large impurity particles in the plus 50 and even plus 30 mesh range. The crude material color is bright orange. Not surprisingly, bodies containing it complement it with ball clay and feldspar. Coming up with an economical substitute for this material is a tricky task both because of its unusual properties and unique combination thereof. There is no other commonly available smooth refractory red burning clay material in North America. Thus some have suggested substituting various low and mid-fire red clays to impart color to clay bodies (i.e. Carbondale Red, Redart). However this is not practical since these materials flux the body producing a more vitreous and browner fired result. Even if feldspar is removed from the body to compensate the red coloration is still compromised to brown. Some have suggested mixes of fireclays mined in the same area (i.e. IMCO 400, 800, Lincoln Fireclay). However these are not nearly refractory enough either (they are not really fireclays) and they have far less iron. Other refractory red clays are not fine grained like Newman and contain iron speckle or other impurities (e.g. Plainsman Firered). Also, Newman has a high firing shrinkage, substitutes will likely be lower (this is not a bad thing of course unless continuity of fired dimensions are important). Understandably any substitution strategy is going to have to involve a mix of materials, including iron oxide and could be more costly (it is messy, but so was Newman). It is also going to involve understanding various tradeoffs. We have compounded a series of mixes to replace Newman (both from physical properties and chemistry perspectives) and have compared their merits by inserting them in place of Newman in a body recipe calling for 50%. We have evaluated color, absorption and fired shrinkage over a range of temperatures, drying shrinkage and drying performance, particle size distribution, etc. So far one mix of materials has proven quite similar to the character of the color, the maturity, the smoothness and the nature of the plasticity. It is code number L3179H and has Imco 400 Fireclay - 67, Silica - 27, Iron Oxide Red: 3, Iron Oxide Yellow: 3. The mix of red and yellow iron were used to duplicate the raw color, you can use straight red iron. Jan 2003 Analysis:SiO2 59.2 Al2O3 21.5 Fe2O3 7.71 CaO 0.05 MgO 0.22 Na2O 0.22 K2O 0.87 TiO2 0.98 LOI 7.3 Out Bound Links
In Bound Links
Pictures Fired test bar ![]() XML for Import into INSIGHT<?xml version="1.0" encoding="UTF-8"?> <material name="Newman Red Clay" descrip="High temperature red burning low plastic stoneware" searchkey="Newman Fireclay" loi="0.00" casnumber="70694-09-6"> <oxides> <oxide symbol="MgO" name="Magnesium Oxide, Magnesia" status="" percent="1.350" tolerance=""/> <oxide symbol="Na2O" name="Sodium Oxide, Soda" status="" percent="0.230" tolerance=""/> <oxide symbol="TiO2" name="Titanium Dioxide, Titania" status="" percent="2.050" tolerance=""/> <oxide symbol="Al2O3" name="Aluminum Oxide, Alumina" status="" percent="16.640" tolerance=""/> <oxide symbol="SiO2" name="Silicon Dioxide, Silica" status="" percent="59.660" tolerance=""/> <oxide symbol="Fe2O3" name="Iron Oxide, Ferric Oxide" status="" percent="5.580" tolerance=""/> </oxides> <volatiles> <volatile symbol="LOI" name="Loss on Ignition" percent="7.300" tolerance=""/> </volatiles> </material> |
The future of ceramic recipe, material and physical testing record keeping is here.
Maintain your recipe database on-line
Imports many file formats
Perfect for Education
|
|
Copyright 2003, 2008 http://digitalfire.com, All Rights Reserved |
|
INSIGHT is ceramic chemistry |